| Availability: | |
|---|---|
| Quantity: | |
JK-C003
Jinke
JK-C003
The JK-C003 electrode lead cable is specifically designed to provide a reliable and consistent connection between electronic devices and application pads. This particular model features a standard 3.5mm DC connector on one end and dual 2.0mm pin connections on the other. By integrating these widely recognized interface sizes, the JK-C003 serves as an essential accessory or a dependable replacement lead for a variety of therapeutic, diagnostic, and testing equipment. For procurement professionals, engineers, and equipment manufacturers, these standardized dimensions make it straightforward to verify assembly compatibility against existing equipment drawings, technical specifications, or current replacement inventory.
Measuring at a practical 1.5m cable length, this electrode lead wire offers an optimal balance between operational mobility and effective cable management. The 1.5-meter reach allows users sufficient freedom of movement during application procedures, while simultaneously preventing the excessive tangling and clutter that often occurs with overly long cords. Furthermore, with a lightweight construction of exactly 45g per piece, the cable minimizes physical drag on the connected interface points. This ensures that the pins remain securely attached without causing strain on the equipment ports. These precise physical parameters—the 1.5m cable length and the listed weight of 45g per piece—provide crucial, objective reference points for buyers when selecting the appropriate accessories for their specific device configurations.
The construction of the JK-C003 focuses heavily on maintaining stable signal transmission and enduring regular, daily use in demanding commercial environments. The 3.5mm DC connector is engineered for secure insertion into the main device port, significantly reducing the risk of accidental disconnections or signal drops during critical operations. On the application end, the 2.0mm pin connections are crafted to fit snugly into compatible receivers, facilitating consistent electrical conductivity. The main cable body is typically jacketed in durable, flexible insulation materials specifically chosen to withstand repeated bending, coiling, and wrapping. The molded joints, where the cable transitions into the connectors, are reinforced to prevent wire fraying—a common point of failure in frequently handled cables. This solid structural design helps extend the service life of the replacement lead, thereby reducing long-term maintenance requirements.
As a fundamental component in device operation, the 3.5mm DC to 2.0mm pin electrode lead cable is frequently sourced by distributors, service centers, and equipment builders. It is widely utilized as a standard replacement lead for existing devices that require reliable signal transfer to function correctly. By standardizing on the JK-C003 model, purchasing departments can effectively streamline their accessory supply chain, ensuring they always have dependable replacement parts readily available for their clients. The clear specification of the 3.5mm and 2.0mm interfaces allows buyers to confidently match the cable with their corresponding hardware, minimizing procurement risks and ensuring reliable integration with their current product lineups. For volume purchasers, the consistent 45g weight and standardized 1.5m length across production batches guarantee uniformity, which is essential for strict quality control and efficient inventory management.
Selecting the correct electrode lead cable requires careful verification of physical dimensions and electrical configurations to ensure reliable operation. Proper equipment matching is essential to maintain stable signal transmission and operational safety. Please review the following compatibility guidelines to help your procurement and engineering teams avoid common selection errors and mitigate purchasing risks.
When assessing compatibility with your target device socket, it is critical to carefully confirm the complete DC connector dimensions and contact layout. Buyers must understand that the nominal 3.5mm size alone does not establish compatibility, as internal configurations can vary significantly across different equipment brands and models. It is necessary to evaluate specific parameters such as the plug's barrel length, the internal pin diameter, and the exact contact layout (including the number of poles and insulation ring placement). Ensuring these exact dimensions match the device socket prevents critical issues such as loose connections, intermittent signal loss, or potential mechanical damage to the equipment interface. A precise, verified fit guarantees that the electrical contacts align correctly for stable, long-term operation in demanding professional environments.
At the electrode end of the lead cable, strict attention must be paid to the terminal interface to ensure proper accessory attachment. Buyers need to thoroughly check the 2.0mm pin dimensions, mating depth, and specific connection requirements of their intended application. The mating depth is a particularly important factor; an improper insertion depth can lead to exposed conductive sections or an insecure fit that may easily detach during movement or routine use. Verifying the exact pin diameter and the required insertion length ensures a secure, flush connection with compatible electrode pads or related accessories. This level of detailed verification helps maintain consistent electrical conductivity, reduces the risk of operational interruptions, and extends the overall service life of the connection points.
Beyond the physical dimensions of the exterior connectors, the internal electrical pathways must be carefully evaluated for system compatibility. The cable wiring must also match the intended equipment exactly. Different monitoring, testing, or industrial devices utilize unique pinout assignments for signal transmission, shielding, and grounding. Using a cable with an incompatible wiring layout—even if the physical connectors appear to fit correctly—can result in inaccurate data readings, signal interference, or equipment malfunction. We strongly advise procurement teams to cross-reference the device's original wiring schematic with the cable's internal layout to guarantee proper integration and safe daily operation.
To streamline the purchasing process and eliminate costly selection errors, we recommend preparing specific documentation based on your exact procurement scenario. Providing accurate equipment information upfront significantly reduces procurement risks and ensures the delivered product meets all functional demands.
For replacement sourcing of existing cables, please provide clear photos of both ends of the original cable. Including high-resolution images of the equipment socket can also assist our technical team in identifying the exact connector profile, contact layout, and any specific wear characteristics that need to be addressed.
Conversely, for equipment integration or custom manufacturing projects, buyers must include comprehensive connector drawings and the required wiring arrangement. Supplying detailed technical schematics, pinout diagrams, and exact dimensional tolerances allows our production engineers to verify that the lead cable will function correctly within your specific hardware ecosystem, ensuring a successful and reliable deployment.
What connectors does the JK-C003 use?
This model features a standard 3.5mm DC connector on the device end and 2.0mm pin connections on the electrode end, designed for typical therapeutic or monitoring equipment interfaces.
How long is the cable?
The standard cable length is 1.5 meters. This dimension provides a practical balance between operational flexibility and reliable signal transmission for typical clinical or home-use environments.
Will it fit every device with a 3.5mm connector?
No. While the 3.5mm plug is a standard size, the complete mating dimensions, internal contact layout, wiring configuration, and specific device output requirements must align to ensure proper functionality and safety.
What information is needed for a quotation?
To ensure an accurate and prompt quotation, please provide the target model number (JK-C003), your required purchasing quantity, and the destination country. Including specific device socket details, electrode connector requirements, and any available wiring drawings will help us verify suitability for your project.
When requesting a quotation for the JK-C003 electrode lead cable, please clearly state your required quantity and confirm your connector specifications. If you are sourcing a replacement for an existing setup, we highly recommend including clear photos of the complete original cable, focusing closely on both connector ends to assist with accurate matching.
| Product type | Electrode lead cable |
|---|---|
| Model | JK-C003 |
| Cable length | 1.5 m |
| DC connector size | 3.5 mm |
| Pin connection size | 2.0 mm |
| Weight | 45 g per piece |
| Country of origin | China |
| Minimum Order Quantity (MOQ) | 1000 pcs |
| Reference Unit Price | USD 1.50 per piece |
| Price Basis | EXW |